stuff for sale

[Broken_Rod]

Ive got 2 d16z6 small blocks for sale need to be rebuilt with all wiring. shift linkage for sohc. axles for sohc right side has damage but left side is in great codition. i have spindles calipers w/discs all assembled. stock springs. ecu for d16z6. just make an offer if interested will take most any offer.

[Broken_Rod]

well if anyone is interested im going to be giving this parts away for free and i will even deliver them if needed

[93sidelsolvtec]

Both blocks need rebuilt? What exactly? Just rings, or bearings. Miles? What wires are you talking about? Those just the small blocks right?

<font color="#a62a2a" size="1">[ July 24, 2006 12:46 AM: Message edited by: 93sidelsolvtec ]</font>

[Broken_Rod]

sorry forgot the mileage one has 135000 and the other has 150000

[Broken_Rod]

well they have been sitting outside under a tarp so im sure they need to be mostly rebuilt. they are small blocks. the wireing is for the fuel injection and for all the sensor.

[pLaYbOi]

i'll take the ecu off of your hands if your givin it away

[Broken_Rod]

sorry already sold it if any one is interested in any of the other stuf im giving them away for free i need to clean out my garage

[Broken_Rod]

i also have a bad tranny 2 axles and interior parts or if any one would be interested i have a type R Jg race block bored to 84.5mm with wiseco high compression pistons and rings (new in box)will include ported and polished b16a2 head w/ oversized valves titanium valve spings. the block also comes with type R crank. it doesnt have rods cams. also have intake manfold exhuast manifold starter pulleys and some other stock parts from my friends si. will sell block and everything listed for $1200

[Broken_Rod]

I still have most of this stuff if anyone is interested. I have the d-series axles, 2 d16 blocks need rebuild, stock spings w/ some extra parts, spindles brakes and a-arm assembly all this would be free if you come pick it up. I also have that type-R small block for sale as well. its a B18C5 JG Race block w/ wiseco pistons bored to 84.5 cm, type-r crank, B16 head bored and oversized valves. w many extra b16 parts. if interested please let me know. just post.

[pLaYbOi]

as for the d16 blocks...are they just the bottom end? I'm sorry i usually refer motors from either a short block or a long block. I'm use to hear "small block" in V8 terms. But anyway, i may pick up the both of them depending on how they're condition is.

Also, what the pricing on all the misc. parts you have for a DOHC going for? I might be able to find a buyer for your depending on price for everything.